Remove dust gas from flammable and explosive materials, which can remove air pollution source

During the ash removal process, the dust particles in the gas will collide, intercept, and diffuse under the action of inertia moment, and then according to the interaction force and electrostatic force, the respirable particles in the gas will be referred to as dust. Clean up and clean air indoors.

吸尘器

This industrial dust collector equipment for dust particles has a small footprint, high temperature resistance, corrosion resistance and high efficiency.

It can remove the dust gas of flammable and explosive products, and can remove several types of air pollution sources such as SO2. It is widely used for ash removal of high temperature dust.

Dust removal equipment

Bag filter type dust particle layer dust collector equipment

Cyclone dust particle layer dust collector equipment with comb and rake gas removal and dust removal. When filtering, the dust gas enters the pre-separation equipment (storm tube) below, and the coarse dust is extracted into the silo.

The gas enters the filter room and is filtered according to the dust particle filter equipment layer from the top to the bottom. The dust is trapped on the surface of the silicon ore dust particles or in the gap between the dust particle layers. The gas is discharged from the entrance and exit according to the clean room and the switching valve.

At this time, the control mechanism operates the hydraulic reversing valve to close the air-cleaning air outlet, and in addition, the air-locking safety channel is opened, and the air-locking airflow enters the dust particles to be cleaned in the opposite direction, so that the dust is in the airflow conveying state.

In addition, the combing rake rotates and mixes the dust particle layer, so that the dust accumulated on the dust particles is loosened and dropped down, and along with the air-locked air flow, it goes through the core pipe and enters the storm tube through the core pipe.

At this time, due to the sudden decrease of the water output and the drastic change of the air flow, the dust block fell into the silo under the action of inertia moment and interaction force. The airlocked air stream containing a small amount of dust is remitted to the person in charge of the fume and sand gas through the fume and sand gas inlet.

Dust removal equipment

When this kind of dust removal equipment is used, it is very simple to operate, there is no inconvenience, and the dust is really inconvenient for respiratory infections, so if there is dust in the production workshop, it is still bought and used Better.